lcd tv - Kogan Technologies

Eager to start watching your new Kogan High Definition LCD TV?

Please follow our start up instructions below and your TV will be ready to use in just a few simple steps.

16" LCD TVs

1. Connect the power cable to the power socket of the TV.
2. Connect the antenna cable to the ANTENNA IN connection of the TV.
3. Insert batteries in the remote control.
4. Press the power button on the remote control or on the top of the TV.
5. Select Auto Tuning from the Start Up window.
6. Press the OK button on the remote control.
7. Select the Start button using the arrow buttons and press OK button on the remote.
8. It will automatically tune all the analogue and digital channels for you. Your TV is now ready for use.

If the start-up wizard doesn't come up and you get a “NO SIGNAL" message, please follow the steps below:

1. Please press the SOURCE button on the remote and make sure that the TV is in DTV mode.
2. If the Start Up window still won’t come up, press the Menu button and scroll down to the Auto Tuning option and press OK.
3. Select start from the pop up message and press OK.
4. It will automatically tune all the analogue and digital channels for you. Your TV is now ready for use.

19” – 24” LCD TVs

1. Connect the power adapter/power cord to the power socket of the TV.
2. Connect the antenna cable to the RF connection of the TV.
3. Insert batteries in the remote control.
4. Press the power button on the remote control or on the side of the TV. (on the 1080P24 LCD please turn on the master switch located under the right hand side speaker before pressing the power button)
5. Follow the Start Up wizard and it will automatically tune all the available analogue and digital channels for you. At the completion of the tuning cycle your TV will be ready for use.

If the start-up wizard doesn't come up and you see the message "Please scan channels", please follow the steps below:

1. Press the Menu button
2. Press the down arrow to select the TV icon
3. Press the right arrow to highlight the country region then select your state by using the right arrow button to scroll through available options
4. Press the down arrow to select Channels and Press OK
5. Select Auto Scan and press OK button
6. Auto Scan will tune all the available channels for you and your TV will be ready to use.

26” – 47” LCD TVs

1. Connect the power cable to the power socket of the TV.
2. Connect the antenna cable to the ANT connection of the TV.
3. Press the master on/off switch located at the back of the TV on the right hand bottom corner (separate from the standby power button). For PRO26/ 1080P-PRO32 TV the master on/off switch is located next to the power socket in the connection panel.
4. Insert batteries in the remote control.
5. Press the power button on the remote or on the side of the TV.
6. Select Auto Tuning from the Start Up window.
7. Press the OK button on the remote control.
8. Select the Start button using the arrow keys and press the OK button on the remote control.
9. All digital and analogue stations will now be automatically tuned for you. At the completion of the tuning cycle your TV will be ready for use.

If the start-up wizard doesn't come up and you get a “NO SIGNAL" message, please follow the steps below:

1. Press the SOURCE button on the remote control and ensure that the TV is in DTV mode.
2. If the Start Up window still won’t come up, press the Menu button and scroll down to the Auto Tuning option and press OK.
3. Select Start from the pop up message and press OK.
4. All digital and analogue stations will now be automatically tuned for you. At the completion of the tuning cycle your TV will be ready for use.

LED TVs

1. Connect the power cord of the TV to the wall socket.
2. Connect the antenna cable to the RF connection of the TV.
3. Put the batteries in the remote control.
4. Turn on the master switch located on the bottom left corner of the TV when you facing the back of the TV.
5. Press the power button on the remote or on the touch panel of the TV.
6. Follow the start-up wizard and it will automatically tune all the available analogue and digital channels for you.

If the start-up wizard doesn't come up and if you just get "Please scan channels" message the follow the steps below:

1. Press the Menu button
2. Press the down arrow to go to TV
3. Press right arrow and scroll down to county region. Select your region
4. Scroll down to Channels and Press OK
5. Select Channel Scan and press OK button
6. It will tune all the available channels for you and your TV will be ready to use.

Please visit our Manuals page to view your comprehensive TV user manual.